This Technics is class A btw.
Sony TA-1010
1971
Power output: 15 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 60kHz
Total harmonic distortion: 0.5%
Input sensitivity: 1.2mV (MM), 250mV (line)
Signal to noise ratio: 70dB (MM), 90dB (line)
Info: hifi engine
$149 free shipping
I snagged this last night, minutes after it was posted. Thanks to @JDM_WAAAT for quickly sending it to me!
Oops sorry
you guys are animals
Learned from the best.
The difference is, we are closers.
Kenwood KA-3500
Info: hifiengine
Power output: 40 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.2%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 76dB (MM), 90dB (line)
Output: 150mV (line), 30mV (DIN)
Dimensions: 380 x 140 x 255mm
Weight: 7.8kg
Year: 1977
$139.99 + shipping
Rochester, NY
That’s near me hmmmmmmmm
In case anyone was curious, I posted the Pioneer SA-6700 over in [Official] Equipment show-off thread - #10 by ALANMAN
JVC JA-S22 Integrated Amplifier
VU meter lights need to be replaced
$149.95 + shipping
Oklahoma City, Oklahoma
Let me know if you dont have the ability to PM the guy directly because youre newly subscribed to that forum and don’t have the required post count and I can help facilitate a connection. He already knows that I’m reaching out to my peoples.
Kenwood KA-3500 (upgraded)
For your consideration is a Kenwood KA-3500 integrated amplifier that has been cleaned, refurbished, and had the output transistors upgraded. Following is what was done to this amplifier:
- Removed cover, knobs, and face plate to facilitate cleaning, service, and upgrades.
- Blew out dust and debris and cleaned circuit boards.
- Replaced transistors Q2, Q4 (matched complimentary pair), Q7, Q8, Q17 - Q20, and output transistors Q21 - Q24 on amp board. Modified heat sink to accept TO3PN package transistors which are readily available and have better specs than the outdated XM20 “bat wing” transistors.
- Replaced coupling capacitors on amp board as well as 2 other caps that were out of spec with quality Nichicon replacements.
- Adjusted amplifier idle bias on both channels to spec of 20ma after 15 minute warm up.
- Replaced all capacitors in the audio path on tone and control board with quality Nichicon replacements.
- Replaced a faulty resistor and 24v zener diode in power supply.
- Cleaned and lubricated all pots and switches with DeoxIt.
- Replaced ac power cord as the original had been spliced.
- Fully tested all inputs and outputs and everything works as designed and amplifier sounds
fantastic. - Cleaned face plate, knobs, and metal cover and reinstalled.
I used this amp for several hours after reassembling and it played fine and sounded excellent with no issues noted.
$199 free shipping
Rotel RDV-1050
58.00 + shipping
Westfield, New Jersey
For anyone needing a CD/DVD player this is an insane deal, especially if you live eastern part of the US. Shipping is a bit costly for those farther west.
This unit also plays DVD Audio, which is a fantastic music format and has some true gems for those who care to seek them out.
Pioneer SA-530 integrated amplifier + TX-130 tuner
Not spectacular, but it’s good. Price is right too.
$99 + shipping
Galesburg, Illinois