Help with SAS drives.

[bob]

Likely the 3.3v power.

You’ll need to power the drives using Molex to SATA adapters, or one of the methods described here:

LSI 9217-8 it mode not showing drives

If there’s 3.3v power going to the drives, you need to 3.3v mod them. Preferred methods to resolve 3.3v issues: The Custom Cable Mod: Use this SATA cable - https://amzn.to/2GA1kVz https://imgur.com/a/nBUfzmD Remove the 3.3v wire mod Use this SATA cable - https://amzn.to/2GA1kVz https://imgur.com/a/PPN5ScY Things that also work: Tape mod: Kapton tape - https://amzn.to/2WfiUok https://imgur.com/a/PPN5ScY Or, simply buy this 5x Molex SATA splitter Use this cable - https://amzn.to/2DC5CuT