Technology


Buy Curious Hardware Software Networking Ebay Finds & Research Tech Support
Topic Replies Activity
Optiplex MT 9010 i5-3570 Worth It? 1 October 16, 2019
Replacement for dying X8DT6-F if i don't need on board SAS? 3 October 12, 2019
Power supply efficiency - brick vs standard - inherent difference? 4 October 9, 2019
Really dumb question about mechanical damage to hard drives 2 October 6, 2019
Sanity Check on pfSense build - Concerning Temps 3 October 2, 2019
LSI 9207-4i4e BIOS/Firmware 1 September 26, 2019
Periodic clunking noise from shucked WD drive? 3 September 17, 2019
Bad Motherboard? 1 September 16, 2019
New server rebooting every 6-7 minutes (Gigabyte GA-7PESH4) 5 September 14, 2019
Gigabyte GA-7PESH4 Freezing at boot menu and when booting to Unraid 9 September 12, 2019
PCI-E riser to fit a GPU in just one slot? 2 September 11, 2019
Rack Mount Rosewill 3 September 11, 2019
Can I install a SAS controller in my existing Windows 10 server build to connect more hard drives? 3 September 5, 2019
Auto-Mounting Filesystems in Linux 1 September 5, 2019
Supermicro X10SLM-F: Stuck in reboot loop, how do I disable IPMI/BMC? 4 September 4, 2019
NK4 "old" vs "new" hardware 4 September 4, 2019
Anniversary-ish: Build Help and What else do I need? 20 September 3, 2019
Rosewill RSV-R4000 PCIe fitment issues 4 August 28, 2019
Supermicro 24bay 4U question 1 August 23, 2019
SAS to SATA Adapters? Maxed out drive capacity help 1 August 23, 2019
To DAS or start fresh 1 August 19, 2019
Tips for buying parts in europe 1 August 18, 2019
DQ77KB / NAS Killer v4.0 troubleshooting 3 August 14, 2019
Hey guys , new here looking for some help 11 August 13, 2019
Thoughts on Phone Cases? 5 August 13, 2019
DFI DT122-BE 2nd Gen AMD Embedded R-Series Industrial Desktop 17 August 10, 2019
Lego Build Advice 1 August 8, 2019
Ordered Apex G1 case for NAS Killer 1.0 - But no front ventilation? 1 August 7, 2019
Cloud Storage Options 8 August 4, 2019
First build - already frustrated AF. X8SIL-F can't get to boot from USB flash drive 4 August 3, 2019